TIL : Disambiguating the main Lifecycle of a Kubernetes Operation : by using "Cluster API" as an example : with a note on the Separation of Concerns addressed by Knative

Executive Summary

• - kubernetes is software that manages software - but it doesn't provision or deprovision hardware
• - kubernetes HAS an extension / sub-project called ClusterAPI that DOES de/provision hardware ( but it runs as ... surprise, its own kubernetes cluster, so it requires a bootstrap to provision the first hardware, for the first cluster, which then manages all the other hardware and clusters )
• - ALL of the above is basically a super complicated replication and load-balancing framework ... to get from there to anything that remotely resembles a PaaS or FaaS that developers can use ... you might consider the Knative framework for Kubernetes

/// 1. SOFTWARE ///

• - - Kubernetes (K8s) is an application which manages other applications in a cluster of machines, but does not de/provision the hardware which any of this software is executed on
• - - a K8s Ingress is a network point for non-cluster parties to gain access to a K8s Cluster
• - - a K8s Cluster's Control Plane manages the Cluster's Services ; the Control Plane may run on one, or more ( hardware ) Nodes in their Cluster ... sometimes referred to as Master Nodes or Control Nodes
• - - a K8s Service is a composed set of applications running in a K8s Cluster ; a Cluster may run one or more Services ; the distinguishing quality of a Service is that it is available, as opposed to ephemeral ; Services may run on one, or more ( hardware ) Nodes in their Cluster ... almost always referred to as Worker Nodes ( the use of the phrase "Data Plane" to refer to K8s Services is a misnomer, badly copied from the domain of networking terminology, from where the term "Control Plane" originated )

/// /// 1.1. Composition of a Service /// ///

• - - - - a K8s Deployment of a K8s Service specifies a change in a ReplicaSet
• - - - - a K8s ReplicaSet specifies a number of identical Pods to maintain in a K8s Service, based on a PodTemplate
• - - - - a K8s Pod is the smallest defineable application in a K8s Service ( Amazon refers to Pod as "Tasks" ) ; a K8s Service may contain one or more Pods ; Pods implement Services ; Pods are expected to be ephemeral ; a Pod's definition is referred to as a PodTemplate ; a Service can also specify Pods without a ReplicaSet
• - - - - a Operating System Container is a jail for applications ; a Pod may contain one or more Containers ; Containers implement Pods ; because Pods are expected to be ephemeral, Containers are expected to be ephemeral 

/// /// 1.2. Knative : Opinionated K8s /// ///

• - - Knative is a K8s Extension, and opinionated framework, for resource management in K8s ; one the often cited use-cases is for developers trying to build a Platform-as-a-service, Container-as-a-Service, or Functon-as-a-Service, on K8s clusters

/// 2. HARDWARE "INFRASTRUCTURE" ( physical or virtual ) ///

• - - physical or virtual machines in K8s are called Nodes ( see Master Node, Control Node, Worker Node, above )
• - - Cluster API (CAPI) is a K8s software sub-project which can handle the de/provisioning of said infrastructure ; CAPI itself, of course, runs on infrastructure, which needs to be bootstrapped
• - - CAPI Management Clusters are K8s clusters used to run CAPI
• - - CAPI Workload Clusters are other K8s clusters managed by a Management Cluster

/// /// 2.1. Bootstrapping CAPI's Management Cluster /// ///

• - - - - OpenToFu, or something else, may be used to bootstrap infrastructure provisioning
• - - - - a CAPI Bootstrap Provider ( e.g. kubeadm init ) may be used to bootstrap the Kubernetes (K8s) cluster upon the bootstrapped infrastructure 
• - - - - ... to close the loop, bootstrapping needs a symmetrical automation to terminate the Management Cluster and to deprovision its infrastructure

See also : link

Automotive / Vehicular / Car Paint - TL;DR

Car paint TIL ( possibly relevant to any metal substrate, and then some ) : 

// CHEMISTRY //

- BEWARE ambiguous terms : LACQUER, ENAMEL, RESIN are all non-specific labels which may refer to a very wide variety of formulations

- CURING time : paints require days or months to fully cure, so leaving a WEEK between layers may help for DIY projects, especially if you don't have a car-sized oven

- HARDENERS : anything which requires you to mix two parts ( usually 1-2% hardening catalyst ) is likely to be stronger than a one-part product; but this is not absolutely guaranteed to be true

- DURABILITY : [ ( stronger ) : polyurethane > epoxy > acrylic > nitrocellulose : ( weaker ) ], paint formulations typically have a mix of these chemicals; branding of the product might highlight one chemical over the others; polyurethane (PU) is generally regarded as having the highest durability, particularly against ultraviolet radiation 

// MECHANICS //

- SANDING : always address the substrate before applying the layer over it; wet or dry methods may apply

- 1 : lower layer : "body FILLER" x "putty" : the structurally strongest stuff is a { polyester resin, hardener, fibreglass } concrete ... this method is used to build entire car bodies, in some cases ; otherwise it is usually just for smoothing out cavities

- 2 : lower-mid layer : PRIMER : the main role here is to protect metal from rusting, and to provide adhesion to upper layers ... the stack is usually [ metal OR filler > PRIMER > pigment > clear ], however [ metal > PRIMER > filler > PRIMER > pigment > clear ] also works 

- 3 : higher-mid pigment : whatever ... see CHEMISTRY, above

- 4 : top layer : clear coat ... see CHEMISTRY, above

- 5 : super top layer : clear polymer or ceramic coatings ... are regarded as "not paint" but basically play the same function, and should be regarded inclusively with paint maintenance; these are commonly applied with a cloth, using a special method

Cholesterol x Hormone Production

Quite speculative :

I've been studying a supplemented soy-based diet. Concepts of interest to date have included : protein, minerals, vitamins, nitric oxide precursors, creatine, and carnosine. 

Next, I am considering the role of dietary cholesterol in hormone production rate. 

If any nutritional biochemists have a related research program going on, please ping me.